16 OZ - ENGINEERING QUALITY INSTAND ADHESIV

Browse Categories

16 OZ - ENGINEERING QUALITY INSTAND ADHESIV 3200 16

Features:

12-15 second cure.
Use 3200 (Low Viscosity) for coarse mesh, 305 and lower.
Use 3290 (High Viscosity) for fine mesh, 230 and higher.
2500lb Overlap Shear Strength.

Price: $ 39.95 / 16 OZ

Qty	Break
1	$ 39.95
3	$ 37.95
5	$ 35.95
10	$ 33.95
16	$ 31.96

16oz Squeeze Bottle With Nose Cone.

HOW TO USE:

HOW TO USE WITH SPRAY ON ACTIVATOR: Clean the frame with 5100 Frame Prep. Stretch fabric over the screen with a stretcher. Make sure the frame is in contact with the fabric. Squeeze the bottle to apply a 1/8" bead of adhesive in the middle of the frame. Spread the adhesive with an applicator squeegee or stiff paper board. Spray the least amount of activator possible on to the adhesive. The adhesive will cure in 8 to 12 seconds.

HOW TO USE WITH WIPE ON ACTIVATOR: Clean the frame with 5100 Frame Prep. Apply wipe on activator with the applicator or cotton swab. Do not puddle the activator. This can be done 24 hours before stretching. Stretch fabric over the screen with a stretcher. Make sure the frame is in contact with the fabric. Squeeze the bottle to apply a 1/8" bead of adhesive in the middle of the frame. Do one side at a time. Spread the adhesive with an applicator squeegee or stiff paper board. The adhesive will wick down and cure in 8 to 12 second.