Watch the machine in action!
High
Res. Low
Res.
(right click or CTRL + click to save)
|
Features:
Eliminates
Flammable Solvents: Uses
safe biodegradable solvents
Eliminates Mess: Completely
closed system.
Eliminates Solvent & Ink Laden
Rags: Not needed with the closed system
Cleans Screens Quickly
1 TO 3 MINUTES
No lost time or production
Recycles Chemistry: The least expensive system
to operate available
Eliminates Disposal Costs: Only pigment laden
filters require disposal.
LOW LIFT COVER 9010-3 has a double hinged
top with a 34" lift cover height (pictured below).
|
This
is the latest advance in automatic screen washing available
anywhere. We feel that this is the safest system available
for both the worker and the environment. The washer
is a electronically controlled, air powered system.
This eliminates the need for explosion proof motors
that might not remain that way. Air power is the safest
source for powering a solvent based cleaning system.
All the operator is required to do is place the screen in the holding easel and
push one button. At that point, one of the dual air pumps delivers one of our
Screen Systems approved biodegradable cleaning solvents to the scanning spray
head. The head delivers wash to the screen at about 100 p.s.i.
The fan shaped spray moves across the screen providing maximum surface agitation
and pressure. This agitation combined with the solvent power of Screen Systems
approved solvents completely |
cleans
any screen in a about one minute in the 9010-1 (sizes
to 27x36") or about three minutes in the 9010-3
(sizes to 46x57"). After solvent drains from
the screen, it flows into the drain in the bottom
of the cleaning chamber and is pumped through a second
pump to a series of two filters. This dual filtration
design removes particles down to one micron in size
from the solvent, effectively removing almost all
pigment. Only used filters need to be properly disposed
of. From the second filter, the solvent is returned
to the reservoir for reuse. Because the solvent is
filtered before being returned to the reservoir,
there is no sump to clean out. Screen Systems biodegradable
solvents are water soluble and easily removed from
the screen with water.
The cabinet and most components are made of welded polypropylene. This makes
them almost indestructible while being light weight.
|
Controls
are all solid state with easy to read LED display.
While a standard cycle time is set at the factory,
it can be easily changed to meet any job. The entire
system uses 12 volts (standard household current is
115 volts) for absolute safety. A UL approved 12 volt
converter is supplied with the system. The automatic
washer can not be operated with the top open. Air supplied
should not exceed 100 psi or 20 c.f.m. The system allows
the effective use of biodegradable solvents while keeping
their cost below that of standard solvents.
Also included in the system is a power wash brush that can have wash pumped though
it while the operator cleans squeegees, flood bars, mixing tools, etc. The power
brush is activated from the control panel and can be used with the top up.
Compressed air source of 100 p.s.i. at 20 c.f.m. required from an external source
(not included with washer).
U.S. Patent No. 5,056,948 |
